That Bare Concrete Floor Has More Potential Than You Think

Epoxy Flooring Services for Your Home in Saskatoon and Surrounding Areas

Bare concrete collects dust, stains easily, and is difficult to keep clean. An epoxy coating solves that without replacing the floor. Revive Painting and Wall Coverings installs solid colour and decorative flake systems in garages, basements, kitchens, bathrooms, foyers, and outdoor surfaces across Saskatoon, Martensville, Warman, Prince Albert, and the surrounding areas. Every installation starts with the surface prep that makes the coating last.

  • Free Estimates
  • Onsite/Instant Estimates
  • No-Surprise Guarantee – What we quote is what you pay!
  • Clear, Transparent, Daily Communication
  • Always On-Time
  • Locally Owned and Operated
  • Licensed & Insured

Where Residential Epoxy Coatings Work in Your Home

Professional Epoxy Flooring Services

Revive Painting and Wall Coverings installs epoxy in garages, basements, laundry rooms, kitchens, bathrooms, foyers, concrete patios, and porch surfaces across Saskatoon and surrounding areas. The surface and the use case determine the product, and every installation begins with an honest assessment of whether epoxy is the right fit for your floor. If the surface is not suitable, we tell you before taking a deposit.

1,200+

Happy Clients in Saskatoon and Surrounding Areas

Epoxy Systems Built for How the Floor Gets Used

Home Epoxy Flooring Specialists

Revive Painting and Wall Coverings offers two residential systems suited to different floors and uses. Solid colour epoxy gives a clean, uniform finish that reflects light well and is the common choice for garages and utility spaces. Decorative flake systems broadcast colour chips into the wet epoxy layer, creating a speckled finish that hides surface variation and adds traction underfoot. Both systems use the same prep process and work on indoor and outdoor concrete.

  • Garage floors
  • Porch floors
  • Concrete patios
  • Laundry room floors
  • Basement floors
  • Kitchen floors
  • Bathroom floors
  • Foyers
  • And more

How To Care For Your Epoxy Floors

Protecting Your Epoxy Floor After Installation

Routine sweeping and damp mopping with a pH-neutral cleaner is all most residential epoxy floors require. Avoid harsh solvents, acidic cleaners, and abrasive scrubbing pads, which all degrade the topcoat over time. At the close of every project, Revive Painting and Wall Coverings provides specific maintenance guidance for the system installed on your floor.

Free estimates icon
Cleanup after project icon
Always on time white icon

Recent Residential Epoxy Installations

Browse completed residential epoxy floor projects from Revive Painting and Wall Coverings in Saskatoon and surrounding areas. From garage floor coatings and basement installations to porch surfaces and laundry rooms, each project here shows what a properly prepared and applied epoxy system looks like in a finished residential space.

Epoxy Countertop
Epoxy Flooring
Epoxy Countertop
Epoxy Flooring
Epoxy Countertop
Epoxy Flooring
Epoxy Countertop
Epoxy Flooring
Epoxy Countertop
Epoxy Flooring
Loading the next set of gallery items...
Load More

Residential Epoxy Floor Questions

Any concrete floor that is structurally sound and properly prepared is a candidate for epoxy coating. Revive Painting and Wall Coverings installs residential epoxy systems in garages, basements, laundry rooms, kitchens, bathrooms, and foyers, as well as outdoor concrete surfaces, including patios and porches. We do not coat driveways. If you are unsure whether a specific floor in your home is suitable, the estimate visit is the right time to assess it. We will tell you honestly whether epoxy is a good fit for that surface.

A properly installed epoxy floor on a well-prepared substrate can last 10 years or more in a residential setting, depending on traffic levels and maintenance. Garage floors that see heavy vehicle traffic and chemical exposure typically show wear faster than indoor installations. Surface preparation is the single biggest factor in how long an epoxy coating holds up. A floor that has been properly ground or shot-blasted and cleaned before coating will outlast one that was simply rolled over without prep, regardless of the product quality.

Preparation is where most of the work in an epoxy installation takes place. Revive Painting and Wall Coverings‘s prep process includes thoroughly cleaning the surface, addressing any cracks or spalling, removing any existing coatings, and profiling the concrete to provide the epoxy with something to bond to. Moisture testing is also part of the process, as excessive moisture in a concrete slab is one of the most common causes of epoxy delamination. Skipping or short-cutting prep is the primary reason residential epoxy installations fail prematurely, and we do not skip this step.

Solid colour epoxy gives you a uniform, smooth finish in a single tone. It is clean in appearance, reflects light well, and is easy to maintain. Decorative flake systems add vinyl colour chips broadcast into the epoxy while it is still wet, creating a speckled, multi-tonal finish that adds visual texture and traction. Flake systems also do a better job of camouflaging minor surface imperfections and everyday dirt between cleanings. Both options are available in a wide range of colours, and the choice usually comes down to the look you want and the use case for the floor.

Light foot traffic is typically possible within 24 hours of the final coat. Vehicle traffic and heavy use on a garage floor generally require a longer wait, usually 48 to 72 hours, depending on the specific product used and the ambient temperature at the time of installation. Colder temperatures slow the curing process. Your project manager will give you specific guidance on re-entry timing based on the products used and the conditions at your property. We confirm this before we leave the site on the final day.

Standard solid colour epoxy can become slippery when wet, which is why Revive Painting and Wall Coverings recommends a non-slip additive or a decorative flake finish for floors that may see water exposure, including garage floors, laundry rooms, and outdoor surfaces. The flake finish naturally adds texture, improving traction underfoot. For smooth, solid colour systems, a slip-resistant broadcast material or topcoat additive is available. If the floor you are having coated is in an area that sees regular moisture, bring it up during the estimate, and we will recommend the appropriate solution.

It depends on the condition and adhesion of the existing coating. Epoxy needs to bond directly to a profiled concrete surface for a durable result. Existing coatings that are peeling, flaking, or poorly adhered need to be fully removed before a new system can be applied. Well-bonded existing coatings can sometimes be overcoated, but this requires a careful assessment of the substrate. Revive Painting and Wall Coverings evaluates the floor condition during the estimate visit and will outline any additional prep steps required before installation can proceed.

Epoxy is a coating made from a two-part resin-and-hardener system that chemically bonds to concrete. Concrete coatings is a broader term that includes epoxy, polyurea, polyaspartic, and other coating systems. Revive Painting and Wall Coverings offers both epoxy systems and concrete coating options for patios, porches, and outdoor surfaces where performance in UV exposure and temperature variation is a higher priority. Polyaspartic and polyurea systems cure faster than traditional epoxy and hold up better to UV light, making them better suited to outdoor or sun-exposed applications.

The cost of a residential epoxy installation depends on the size of the floor, the condition of the existing concrete, the system chosen, and the amount of prep work required. Floors that need significant crack repair, coating removal, or moisture mitigation before installation will cost more than a clean, structurally sound slab. Revive Painting and Wall Coverings provides a detailed written estimate after an on-site visit so you have an accurate number before committing. Our minimum project size is $1,000. Free estimates are available in Saskatoon, Martensville, and Warman. Call 639-740-0157 or book online.

What Makes Our Epoxy Installations Hold Up

Why Choose Our Epoxy Services?

A floor coating that fails early is almost always the result of preparation cut short, and it means the cost and disruption of doing the whole job again. Every residential epoxy project across Saskatoon and surrounding areas follows the same prep standard and an honest assessment of whether the floor is a good candidate before work begins. That approach is what produces results that hold up.

Epoxy Flooring

Not Sure If Your Floor Is a Good Candidate? That Is What the Estimate Is For.

Contact Your Local Residential Epoxy Installers

An on-site visit is the only way to know if a floor is ready for epoxy and what the work would involve. Revive Painting and Wall Coverings offers free estimates in Saskatoon, Martensville, and Warman and serves homeowners across Saskatoon, Martensville, Warman, Prince Albert, and surrounding areas, with no obligation to proceed. Call 639-740-0157 or book online, Monday to Friday, 8 am to 5 pm Saskatchewan time.